How to Maintain an E-Scooter

How to Maintain an E-Scooter

Has your e-scooter been acting up or performing slower than normal? This is a common sign that it’s in need of a little TLC. Read on to learn how to maintain an e-scooter so you can keep it running safely and efficiently.

Why It’s Necessary to Maintain an E-Scooter

Like any piece of equipment, regular maintenance is needed to keep it functioning properly and safely. The same applies to your e-scooter. Taking good care of it will help to reduce potential hazards and breakdowns, reduce repair costs, and make it more reliable whenever you need it. A good habit to practice is doing a quick inspection before you step onto your e-scooter. Focus on the condition of the frame, wheels, and brakes. By doing this, you can make sure it’s safe to use, which is the main priority.

Keep it Clean

The most important step for general e-scooter maintenance is keeping it clean. This doesn’t just mean rinsing it off with the hose. As an electric piece of equipment, it needs a more detailed cleaning. Use a rag or microfiber cloth and dampen it to remove any dirt and grime on the scooter. If there’s caked-on dirt that can’t be removed with the cloth, use an old toothbrush or paintbrush to tackle any stubborn areas. If needed, use a tiny bit of soap and water. 

Check and Replace Brakes When Necessary

As the most important part of the e-scooter, it’s important to take care of the brakes. Certain e-scooters will require more frequent adjustments than others. If the brake pads are starting to look worn, don’t ignore them. Have them replaced at your local e-scooter shop.

Maintain Tires

The tires are another important feature of maintenance. Keep an eye on them and check the air pressure often. If the performance of your scooter has noticeably slowed or handling becomes challenging, your tires are likely to blame. If the tires feel or appear under-flated, you can use a bike pump to top them back up. Check the pressure monitor gauge before you hop back on the scooter.

Avoid Draining the Batteries Completely

A simple care and maintenance tip is to avoid draining your batteries completely. Over time, this can reduce the lifespan of the batteries. To make them last as long as possible, keep them topped it.

Be Cautious During Bad Weather

Some e-scooters are designed to be more resilient during bad weather. Each scooter comes with an IP rating which indicates how waterproof it is – or isn’t. The higher the number, the better it will be during wet weather. It’s a good idea to learn what your IP rating is so you can plan your ride based on the forecast. If your IP is low, avoid taking it out during messy weather conditions. 

Store it in a Temperate Environment

When it’s time to store away your e-scooter for the winter, make sure it’s placed in a location that won’t experience cold temperatures. Ideally, it should be kept in a temperate environment to avoid damage. Also, don’t forget to charge it fully every month even when it’s not in use to keep the battery in good condition.

E-scooters are incredible devices, and they’re one of the easiest modes of transportation today. To keep your ride running smoothly and safely, don’t skip out on maintenance. When it’s time to leave it in for repairs, replacements or a checkup, trust our experts at Repair and Run. We have professionally trained technicians who offer same-day service, or they can even come to you. There’s also a full warranty applied on all parts and labour. Nous contacter today to schedule an appointment.

12 Tips to Make Your E-Bike Go Further

12 Tips to Make Your E-Bike Go Further

Are you not getting the full range of your e-bike? A little tweaking and adjusting will help fix any lag you’re experiencing and optimize the efficiency of your e-bike. Here are 12 simple tips to make your e-bike go further.

Add More Of Your Own Power

There’s no surprise that putting more of your own pedalling power into your ride will drastically increase your e-bike range. But did you know that if you pedal while accelerating, it will cut the energy use down significantly? It’s one easy tip to get more power needed to push the e-bike a little further.  

Turn Down The Assist Level

The e-bike pedal assist function is super convenient as it provides power to the motor, helping you pedal easier. However, the assist function can also suck the power out of your bike. If you’re starting to run out of battery range, simply turn down the assist level to 1 and start pedalling moderately. You’ll get an instant boost in range. 

Recharge More Often

A good way to get your e-bike to go further is to charge it more frequently.  A battery with a higher charge will have more voltage. This will get you more range and more speed. So, bring a battery charger with you when you go out next and recharge while you’re running errands or visiting friends. And ensure that you keep the battery charge between 20 to 80 per cent to help maximize your e-bike’s battery life.

Replace The Battery

Like every other battery, the one in your e-bike will eventually degrade over time. If you’re not getting the same range as you once did, it might be time to replace it. If you’re going to buy new, aim for a bigger battery that can add more range.

Inflate The Tires

The more weight on the bike, the more energy the bike has to use, especially when going uphill. If you find that your weight is impacting your range, try inflating your tires to as high as you can handle. Pumping to the max pressure rating will reduce the rolling resistance, but it will also create a tougher, bumpier ride.

Reset Your Seat

The position of your seat can also impact the total power output. To increase the overall efficiency, set the seat high enough that your leg is fully stretched out when you touch the peddles. Physics will do the rest. 

Use Smoother Tires

Do the tires on your e-bike have lots of ridges and knobs? These types of tires are great for gripping corners but not so great when it comes to speed and distance. Having a set of smooth tires will have less rolling resistance and allow you to go further. 

Switch To Narrower Tires

The tire width can also affect the total distance your bike can travel. Another way to optimize the e-bike to go further is to swap out the tires for one’s that are narrower. 

Adjust Your Posture

The windier it is outside, the more drag you’ll experience on your e-bike. However, you can reduce the drag and make yourself more aerodynamic by adjusting your posture by crouching over the handlebars. 

Reduce Throttle Use

Do you like to go full throttle when on the bike? If you can reduce the amount of throttle use and keep the acceleration more consistent, you can keep more energy in the battery. Tip: Pick up a watt meter so that you can better control your acceleration for optimal performance.  

Accelerate Slowly

Are you trying to gain full speed right after you’ve stopped? You’re going to consume a lot of energy riding this way. Ease up on the acceleration, especially when riding up a hill, to allow your e-bike to conserve more energy. 

Maintain The Parts

Every few months, give your bike a quick inspection to see what needs a little care. All it really takes is a little oil for your chain and quick break tuning to optimize your e-bike and improve its overall efficiency on the road. 

Does your e-bike need a repair or tune-up? Visit us at Repair and Run, and one of our trained technicians will help to optimize your e-bike for you.

5 Crucial Bike Maintenance Tips

5 Crucial Bike Maintenance Tips

Whether you live in an urban center or a suburb, a bicycle is a great way to get around. It’s good for your health, it’s good for your budget, and it’s good for the environment. For all those who have taken up biking as their official form of transportation or as a hobby, we at Repair and Run have put together a list of tips to help you maintain your bike. Let’s go over them together!

Clean Your Bike Regularly

Sometimes maintenance comes down to simply keeping your bike clean on a regular basis, preventing dirt, oil, and grime from building up. It may sound like a pain to do but, after every bike ride, you should perform a routine washing, even if it’s a quick one. This involves de-greasing the cogs of your chain and wiping down the bike with soap and water. If needed, you can use rubbing alcohol to remove black grime from your bike. Looking after your ride in this way will prevent larger issues from occurring later on while improving component longevity. 

Lubricate

One of the most important tools you need for bike maintenance is a good lubricant. When you finish rinsing your bike off after a ride, you should apply lubricant to the gears and chain. You can also use this method to prevent the jockey wheels from locking up, which can happen if there’s a buildup of oil and dirt. Every few months, use a lubricant to grease the cables of your bike so that you’re never in a position where they snap while you’re riding. 

Listen

Is your bike squeaking and creaking? That’s its way of telling you that there’s something wrong. Your bicycle should be producing a ‘whirring’ sound, so if you’re hearing something else, it’s time to investigate. Squeaking and creaking can be signs of:

  • Friction between the cassette and the chain, which is wearing down both parts
  • A loose spindle
  • Rear-derailleur pulley wheels in need of lubrication.

Process, Process, Process!

Bicycles are machines, so when you’re assembling and disassembling them, you have to be very careful. Before you start taking your bike apart, and for every part you take off in the first place, take a picture to document the process. That way, when you’re ready to put it all back together, you’ll know what piece came off when. This will save you a whole lot of headaches and second-guessing later on. The last thing you want is to have a mysterious piece left over once you’ve reassembled your bike! Work from the top down or front to back, sticking to a regular disassembly and reassembly plan, ensuring you’ll always know where you are. If you’re forced to take a break from the project or get distracted by something, it will be easier to return to it.

Also, a word of warning: don’t work on the bike when it’s upside down. It can ruin your saddle, cables, and accessories. Get a repair stand, or find another way to suspend it. 

Know When to See a Mechanic

If a problem is outside your scope of expertise, don’t hesitate to bring your bike to a professional. Some fixes can easily be done at home, but when you don’t know what you’re doing, you run the risk of making the problem worse. Assess your own abilities before starting a maintenance project, and don’t be afraid or embarrassed to admit it if you need help. We all need it from time to time!

At Repair and Run, our focus is on high-quality bike repairs. Our technicians can repair most fixes on all models of bicycles within a day. They complete the majority of other serious repair jobs within a week. We’re proud of what we do and stand by our work, offering a full warranty on all parts and servicing. Nous contacter for more information today!